Typical Malfunction Thresholds
WARNING: This page is about a different car, the 2008 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.
[ON malfunction]
Detection condition: Total accumulated time of ON malfunctions (a), (b) and (c) is 1 second or more
ON malfunction (a):
TYPICAL MALFUNCTION THRESHOLDS CHART - ON MALFUNCTION (a)
| NT - NC x 2nd gear ratio | 100 rpm or more at intermediate shaft speed 1,000 rpm |
|---|---|
| NC - NO x Low gear ratio | 300 rpm or more at output speed 1,000 rpm |
| Duration | 1 sec. or more |
ON malfunction (b):
TYPICAL MALFUNCTION THRESHOLDS CHART - ON MALFUNCTION (b)
| NT - NC x 1st gear ratio, NT - NC x 3rd gear ratio or NT - NC x 3.5th gear ratio | 100 rpm or more at intermediate shaft speed 1,000 rpm |
|---|---|
| NC - NO x Low gear ratio or NC - NO x High gear ratio | 300 rpm or more at output speed 1,000 rpm |
| Duration | 1 sec. or more |
ON malfunction (c):
TYPICAL MALFUNCTION THRESHOLDS CHART - ON MALFUNCTION (c)
| NT - NC x 4th gear ratio or NT - NC x 5th gear ratio | 100 rpm or more at intermediate shaft speed 1,000 rpm |
|---|---|
| NC - NO x Low gear ratio or NC - NO x High gear ratio | 300 rpm or more at output speed 1,000 rpm |
| Duration | 1 sec. or more |