Typical Malfunction Thresholds

WARNING: This page is about a different car, the 2008 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.

One of the following conditions is met: Condition (A), (B), (C) or (D)

Condition (A)

TYPICAL MALFUNCTION THRESHOLDS CHART - CONDITION (A)

Number of the following signal input at the same time	2 or more
P switch	ON
R switch	ON
N switch	ON
D switch	ON
3 switch	ON
2 switch	ON

Condition (B)

TYPICAL MALFUNCTION THRESHOLDS CHART - CONDITION (B)

Number of the following signal input at the same time	2 or more
NSW switch	ON
R switch	ON
D switch	ON
3 switch	ON
2 switch	ON

Condition (C)

TYPICAL MALFUNCTION THRESHOLDS CHART - CONDITION (C)

Both of the following conditions are met:	Condition 1 and 2
1. One of the following conditions is met:	Condition (a), (b), (c) or (d)
(a) NSW switch	ON
(b) P switch	ON
(c) R switch	ON
(d) N switch	ON
2. One of the following conditions is met:	Condition (a) or (b)
(a) 4 switch	ON
(b) L switch	ON

Condition (D)

TYPICAL MALFUNCTION THRESHOLDS CHART - CONDITION (D)

When all conditions below are met:	Condition (a), (b), (c), (d), (e), (f) and (g)
(a) NSW switch	OFF
(b) P switch	OFF
(c) R switch	OFF
(d) N switch	OFF
(e) D switch	OFF
(f) 3 switch	OFF
(g) 2 switch	OFF