Back Door Courtesy Switch: Inspection
WARNING: This page is about a different car, the 2008 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.
- INSPECT BACK DOOR COURTESY LIGHT SWITCH ASSEMBLY
- Measure the resistance of the switch.
Standard resistance
STANDARD RESISTANCE
| Tester Connection |
Condition |
Specified Condition |
| 1 - Switch body |
Pushed |
10 kΩ or higher |
| 1 - Switch body |
Not pushed |
Below 1 Ω |
If the result is not as specified, replace the switch assembly.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002