Data List / Active Test

HINT:

Using the Techstream's Data List allows switch, sensor, actuator and other item values to be read without removing any parts. Reading the Data List early in troubleshooting in one way to save time.

1. Connect the Techstream to the DLC3.
2. Turn the ignition switch ON.
3. Read the Data List according to the display on the tester.

   Center airbag sensor 

   DATA LIST
   
   

   Tester Display	Measurement Item/Range	Normal Condition	Diagnostic Note
   Driver Seat Position	Seat position (Driver side)/ Forward: Seat position forward Bkward: Seat position backward FAIL: Failure detected	Forward/Bkward	-
   Passenger Classification	Front passenger classification/ NG: Data is not determined OFF: Vacant CHILD: Child (Less than 36 kg [79.37 lb]) seated AF05: Adult (36 to 54 kg [79.37 to 119.05 lb]) seated AM50: Adult (More than 54 kg [119.05 lb]) seated FAIL: Failure detected	NG/OFF/CHILD/AF05/AM50	-
   Driver Buckle SW	Buckle switch (Driver side)/ Unset: Seat belt not fastened Set: Seat belt fastened NG: Data not determined	Unset/Set	-
   Passenger Buckle SW	Buckle switch (Front passenger side)/ Unset: Seat belt not fastened Set: Seat belt fastened NG: Data not determined	Unset/Set	-
   Display Type Information	Display type identification information/ LR: Display indicated by LH/RH DP: Display indicated by Driver/ Passenger	DP	-
   Number of Past DTC	Number of past DTCs / Min.: 0, Max.: 255	0	-