LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> FJ Cruiser RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 220 (Meter) >> Meter / Gauge System >> Fail-Safe Chart

Fail-Safe Chart

WARNING: This page is about a different car, the 2008 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.

Speedometer 

FAIL-SAFE CHART

Condition Response Recovery
Speed data is interrupted for 0.12 seconds Gauge needle indicates below 0 km/h (0 mph) Normal data is received

Tachometer 

FAIL-SAFE CHART

Condition Response Recovery
Tachometer data is interrupted for 0.12 seconds Gauge needle indicates below 0 rpm Normal data is received

Water temperature 

FAIL-SAFE CHART

Condition Response Recovery
Water temperature data is interrupted for 3.1 seconds Gauge needle indicates below "C" Normal data is received

Shift indicator 

FAIL-SAFE CHART

Condition Response Recovery
"P" to "D" data is interrupted for 3 seconds All shift indicators go off Normal data is received

Light control rheostat 

FAIL-SAFE CHART

Condition Response Recovery
Variable resistance malfunction Light control output 100% Normal data is received

ODO/TRIP 

FAIL-SAFE CHART

Condition Response Recovery
Regular data is interrupted for 0.12 seconds Calculation stops Normal data is received