Front Door Speaker: Inspection

WARNING: This page is about a different car, the 2008 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.

INSPECT FRONT NO. 1 SPEAKER ASSEMBLY

Measure the resistance of the speaker.

Standard resistance

TESTER CONNECTION SPECIFIED CONDITION CHART

Tester Connection	Specified Condition
1 - 2*1	2.6 Ω
1 - 2*2	Approx. 4 Ω
HINT: 1: for Premium sound models 2: for Standard models

Fig 1: Identifying Front No. 1 Speaker Connector Terminals

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

If the result is not as specified, replace the speaker assembly.

INSPECT FRONT NO. 2 SPEAKER (for Premium Sound Models)

Measure the resistance of the speaker.

Standard resistance

TESTER CONNECTION SPECIFIED CONDITION CHART

Tester Connection	Specified Condition
1 - 2	2.5 Ω

If the result is not as specified, replace the speaker assembly.

Fig 2: Identifying Front No. 2 Speaker Connector Terminals