REAR SEAT INNER BELT ASSEMBLY (for Sedan): Removal

WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.

REMOVE REAR SEAT CUSHION COVER PAD SUB-ASSEMBLY
1. for 60/40 Split Seat Type:
  1. Remove the rear seat cushion cover pad (See REMOVAL ).
2. for Fixed Seat Type:
  1. Remove the rear seat cushion cover pad REMOVAL .
REMOVE REAR SEAT INNER BELT ASSEMBLY
1. for RH Side (for 60/40 Split Seat Type):
  1. Remove the bolt and the rear seat inner belt.
    
    Fig 1: Locating Rear Seat Inner Belt Bolt
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. LH Side:
  1. Remove the bolt and the rear seat inner belt.
    
    Fig 2: Locating Rear Seat Inner Belt Bolt
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002