FRONT PASSENGER SEAT BELT WARNING LIGHT (for Sedan): Inspection
WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.
- INSPECT HAZARD WARNING SIGNAL SWITCH ASSEMBLY (Built in Front Passenger Seat Belt Warning Light)
- Check the operation.
- Apply battery voltage to the terminals and check that the indicator illuminates.
Standard
INDICATOR ILLUMINATES CHART
| Condition |
Standard |
| Positive battery - Terminal 6 (IG+) Negative battery - Terminal 8 (PBEW) |
Illuminates |
If the result is not as specified, replace the hazard warning signal switch.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002