LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> FJ Cruiser RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 218 (Seat Belt) >> FRONT PASSENGER SEAT BELT WARNING LIGHT (for Hatchback) >> Inspection

FRONT PASSENGER SEAT BELT WARNING LIGHT (for Hatchback): Inspection

WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT FRONT PASSENGER SEAT BELT WARNING LIGHT 
    1. Check the operation.
      1. Apply battery voltage to the terminals and check that the indicator illuminates.

        Standard 

        INDICATOR ILLUMINATES CHART

        Condition Standard
        Positive battery - Terminal 6 (IG+) Negative battery - Terminal 3 (PBELT) Illuminates

        If the result is not as specified, replace the front passenger seat belt warning light.

        Fig 1: Applying Battery Voltage To Terminals
        G04830522Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002