CHILD RESTRAINT SEAT ANCHOR BRACKET (for Sedan): Installation

WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL CHILD RESTRAINT SEAT TETHER ANCHOR BRACKET
HINT:

Use the same procedure to install all the child restraint seat tether anchor brackets.
1. Insert the hook into the body hole and install the child restraint seat tether anchor bracket with the bolt.
  Torque: 42 N*m (430 kgf*cm, 31 ft.*lbf)
  
  Fig 1: Locating Child Restraint Seat Tether Anchor Bracket Bolt
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Engage the claw and close the package tray rim cover.
  
  Fig 2: Identifying Package Tray Trim Cover Claw
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002