Fuel Sender Gauge Assembly (For Sedan): Removal

WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.

REMOVE REAR SEAT CUSHION COVER PAD SUB-ASSEMBLY (see REMOVAL )
REMOVE REAR FLOOR SERVICE HOLE COVER (see REMOVAL )
DISCHARGE FUEL SYSTEM PRESSURE (see REMOVAL )
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
DISCONNECT FUEL TANK MAIN TUBE SUB-ASSEMBLY (see REMOVAL )
DISCONNECT FUEL TANK VENT HOSE SUB-ASSEMBLY (see REMOVAL )
REMOVE FUEL PUMP GAUGE RETAINER (see REMOVAL )
REMOVE FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY (see REMOVAL )
REMOVE FUEL SENDER GAUGE ASSEMBLY
1. Disconnect the fuel sender gauge connector.
  
  Fig 1: Locating Fuel Sender Gauge Connector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Unlock the fuel sender gauge, and slide and remove it.
  
  Fig 2: Identifying Fuel Sender Gauge
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002