Clutch Release Cylinder: Removal

WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.

DRAIN BRAKE FLUID
DISCONNECT CLUTCH RELEASE CYLINDER TO FLEXIBLE HOSE TUBE
1. Using SST, disconnect the flexible hose tube.
  SST 09023-00101
  
  HINT:
  
  Use a container to collect the fluid.
  
  Fig 1: Locating Flexible Hose Tube
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE CLUTCH RELEASE CYLINDER ASSEMBLY
1. Remove the 2 bolts and the clutch release cylinder.
Fig 2: Locating Clutch Release Cylinder Bolts
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002