Clutch Release Cylinder: Installation

WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL CLUTCH RELEASE CYLINDER ASSEMBLY
1. Install the clutch release cylinder with the 2 bolts.
  Torque: 12 N.m (120 kgf*cm, 8.7 ft.*lbf)
  
  Fig 1: Locating Clutch Release Cylinder Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
CONNECT CLUTCH RELEASE CYLINDER TO FLEXIBLE HOSE TUBE
1. Using SST, connect the flexible hose tube.
  SST 09023-00101
  
  Torque: 15 N.m (153 kgf*cm, 11 ft.*lbf)
Fig 2: Locating Flexible Hose Tube
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
BLEED CLUTCH PIPE LINE
1. Fill the brake reservoir tank with brake fluid and bleed the clutch system.
  Torque: 8.3 N.m (85 kgf*cm, 73 in.*lbf)
CHECK FOR CLUTCH FLUID LEAKAGE