LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> FJ Cruiser RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 211 (Clutches Manual & Hydraulic) >> Clutch Release Cylinder >> Disassembly

Clutch Release Cylinder: Disassembly

WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE CLUTCH RELEASE CYLINDER KIT 
    1. Remove the boot from the cylinder body.
    2. Remove the push rod from the cylinder body.
    3. Remove the piston from the cylinder body.
      NOTE: Do not damage the inside of the cylinder body.
    4. Remove the spring from the cylinder body.
    5. Remove the bleeder plug cap from the bleeder plug.
  2. REMOVE RELEASE CYLINDER BLEEDER PLUG 
scientia non olet · About LEMON Manuals