Proportioning Valve: Removal

WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.

DRAIN BRAKE FLUID
NOTE: Immediately wash off any brake fluid that comes into contact with any painted surfaces.
REMOVE PROPORTIONING VALVE
1. Using SST, separate the 5 brake tubes from the proportioning valve.
  SST 09023-00100
  
  Fig 1: Locating Brake Tubes
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Remove the 2 bolts and remove the proportioning vale bracket.
  
  Fig 2: Locating Proportioning Vale Bracket Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Remove the 2 nuts and remove the proportioning valve from the proportioning valve bracket.
  
  Fig 3: Locating Proportioning Vale Nuts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002