Front Brake Flexible Hose: Removal

WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.

REMOVE FRONT WHEEL
DRAIN BRAKE FLUID
NOTE: Immediately wash off any brake fluid that comes into contact with any painted surfaces.
REMOVE FRONT BRAKE FLEXIBLE HOSE
1. Using SST, separate the brake tube.
  SST 09023-00100
2. Remove the clip.
3. w/ ABS:
  1. Remove the bolt and separate the flexible hose and speed sensor.
4. w/o ABS:
  1. Remove the bolt and separate the flexible hose.
5. Remove the union bolt and gasket and remove the flexible hose from the disc brake cylinder.
  
  Fig 1: Separating Brake Tube
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002