Drive Belt: Inspection

WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.

INSPECT FAN AND GENERATOR V BELT
1. Visually check the belt for excessive wear, frayed cords etc. If any defects are found, replace the belt.
  HINT:
  - If any defects are found, replace the belt.
  - Cracks on the rib side of a belt are considered acceptable. If the belt has pieces missing from the ribs, it should be replaced.
    
    Fig 1: Identifying Cracks On Rib Side Of Belt
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002