Purge Valve: Removal

WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.

DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
DISCONNECT FUEL VAPOR FEED HOSE NO. 1
1. Disconnect fuel vapor feed hose No. 1.
  
  Fig 1: Locating Fuel Vapor Feed Hose No. 1
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
DISCONNECT FUEL VAPOR FEED HOSE NO. 2
1. Disconnect fuel vapor feed hose No. 2.
  
  Fig 2: Locating Fuel Vapor Feed Hose No. 2
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE PURGE VSV
1. Disconnect the purge VSV connector and disengage the clip.
2. Remove the purge VSV.
  
  Fig 3: Locating Purge VSV Connector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002