PCV Valve: Installation

WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL POSITIVE CRANKCASE VENTILATION VALVE (PCV VALVE)
1. Install the positive crankcase ventilation valve (PCV valve).
  1. Apply adhesive to the end 2 or 3 threads of the bolt.
    Adhesive:
    
    Toyota Genuine Adhesive 1324, Three Bond 1324 or the equivalent.
    
    Fig 1: Applying Adhesive To Threads Of Bolt
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. Install the positive crankcase ventilation valve (PCV valve).
    Torque: 27 N*m (275 kgf*cm, 20 ft.*lbf)
    
    Fig 2: Locating Positive Crankcase Ventilation Valve
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
CONNECT VENTILATION HOSE
INSTALL CYLINDER HEAD COVER NO. 2 (See INSTALLATION )

Fig 3: Locating Ventilation Hose
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002