LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> FJ Cruiser RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 205 (Engine Cooling System) >> Cooling Fan Resistor >> Removal

Cooling Fan Resistor: Removal

WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.
  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
  2. REMOVE FRONT WHEEL LH 
  3. REMOVE FRONT FENDER LINER LH (See  REMOVAL  ) 
  4. REMOVE COOLING FAN RESISTOR 
    1. Disconnect the connector from the cooling fan resistor.
    2. Remove the 2 bolts and the cooling fan resistor.
      Fig 1: Locating Cooling Fan Resistor Bolts
      G04829217Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals