CONDENSER (for Sedan): Disassembly

WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.

REMOVE COOLER DRYER
1. Using a 14 mm straight hexagon wrench, remove the cap from the modulator.
  
  Fig 1: Removing Cap From Modulator
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Using pliers, remove the cooler dryer.
  
  Fig 2: Removing Cooler Dryer
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002