Blower Resistor: Inspection
WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.
- INSPECT BLOWER RESISTOR
- Measure the resistance.
Standard resistance
TESTER CONNECTION AND SPECIFIED CONDITION
| Tester Connection |
Specified Condition |
| 1-4 |
3.12 to 3.60 Ω |
| 3-4 |
1.45 to 1.67 Ω |
| 2-4 |
0.52 to 0.60 Ω |
If the resistance value is not as specified, replace the blower resistor.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002