Blower Motor: Inspection
WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.
- INSPECT BLOWER MOTOR
- Connect the positive (+) lead from the battery to terminal 2 and the negative (-) lead to terminal 1, then check that the motor operates smoothly.
OK: The motor operates smoothly.
If the operation is not as specified, replace the blower motor.
- Measure the current.
Standard current
TESTER CONNECTION AND SPECIFIED CONDITIONTester Connection Condition Specified Condition 1-2 Blower motor operates 1 to 3A If the current value is not as specified, replace the blower motor.
- Connect the positive (+) lead from the battery to terminal 2 and the negative (-) lead to terminal 1, then check that the motor operates smoothly.