LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> FJ Cruiser RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 200 (Air Conditioning) >> Air Conditioning Amplifier >> Installation

Air Conditioning Amplifier: Installation

WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL AIR CONDITIONING AMPLIFIER ASSEMBLY 
    1. Connect the connector.
    2. Install the air conditioning amplifier with the screw.
  2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 

    Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf) 

    Fig 1: Removing Air Conditioning Amplifier
    G04829932Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002