AIR CONDITIONING PANEL ASSEMBLY (for Sedan): Reassembly

WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL HEATER CONTROL SUB-ASSEMBLY
1. Install the bulb.
  
  Fig 1: Removing Bulb
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Engage the 2 claws and install the heater control.
  
  Fig 2: Removing Heater Control
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL HEATER CONTROL BASE SUB-ASSEMBLY
1. Install the bulb.
  
  Fig 3: Removing Bulb
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Engage the 2 claws and install the heater control base.
  
  Fig 4: Removing Heater Control Base
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL NO. 3 HEATER CONTROL KNOB
1. Install the bulb.
  
  Fig 5: Removing Bulb
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Engage the 2 claws and install the No. 3 heater control knob.
  
  Fig 6: Removing No. 3 Heater Control Knob
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002