LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> FJ Cruiser RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 200 (Air Conditioning) >> AIR CONDITIONING PANEL ASSEMBLY (for Hatchback) >> Reassembly

AIR CONDITIONING PANEL ASSEMBLY (for Hatchback): Reassembly

WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL HEATER CONTROL SUB-ASSEMBLY 
    1. Install the bulb.
      Fig 1: Removing Bulb
      G04829886Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Engage the 2 claws and install the heater control.
      Fig 2: Removing Heater Control
      G04829914Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL HEATER CONTROL BASE SUB-ASSEMBLY 
    1. Install the bulb.
      Fig 3: Removing Bulb
      G04829884Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Engage the 2 claws and install the heater control base.
      Fig 4: Removing Heater Control Base
      G04829912Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. INSTALL NO. 3 HEATER CONTROL KNOB 
    1. Install the bulb.
      Fig 5: Removing Bulb
      G04829882Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Engage the 2 claws and install the No. 3 heater control knob.
      Fig 6: Removing No. 3 Heater Control Knob
      G04829910Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002