DTC Check/Clear
WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.
- DTC CHECK
- Connect the Techstream to the DLC3.
- Turn the ignition switch ON.
- Turn the tester ON.
- Enter the following menus: Body Electrical / Main Body / Trouble Codes /
- DTC CLEAR
- Connect the Techstream to the DLC3.
- Turn the ignition switch ON.
- Turn the tester ON.
- Enter the following menus: Body Electrical / Main Body / Trouble Codes /
- Erase the DTCs.