LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> FJ Cruiser RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 199 (Theft Deterrent) >> SECURITY HORN ASSEMBLY (for Sedan) >> Removal

SECURITY HORN ASSEMBLY (for Sedan): Removal

WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.
  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
  2. REMOVE SECURITY HORN ASSEMBLY 
    1. Disconnect the connector.
    2. Remove the nut and the security horn.
      Fig 1: Locating Horn Assembly Nuts
      G04830915Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals