SECURITY HORN ASSEMBLY (for Hatchback): Installation
WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.
- INSTALL SECURITY HORN ASSEMBLY
- Install the security horn with the nut.
Torque: 8.0 N*m (82 kgf*cm, 71 in.*lbf)
- Connect the connector.
- CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf)
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002