LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> FJ Cruiser RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 199 (Theft Deterrent) >> SECURITY HORN ASSEMBLY (for Hatchback) >> Inspection

SECURITY HORN ASSEMBLY (for Hatchback): Inspection

WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT SECURITY HORN ASSEMBLY 
    1. Check the operation.
      1. Apply battery voltage and check the horn.

        Standard 

        TESTER CONNECTION SPECIFIED OPERATION CONDITION

        Condition Specified Operation
        Battery positive (+) - Terminal 1
        Battery negative (-) - Terminal 2        		 Horn sounds

        If the result is not as specified, replace the horn.

        Fig 1: Inspecting Security Horn Assembly
        G04830916Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals