ENGINE HOOD COURTESY SWITCH (for Sedan): Inspection
WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.
- INSPECT HOOD LOCK ASSEMBLY
- Check the resistance of the engine hood courtesy switch.
- Using an ohmmeter, measure the resistance and check the results in accordance with the value(s) in TESTER CONNECTION SPECIFIED CONDITION TABLE
.
Standard Resistance
TESTER CONNECTION SPECIFIED CONDITION TABLETester Connection Condition Specified Condition 1-2 Lock 10 kΩ or higher 1-2 Unlock Below 1 Ω If the results is not as specified, replace the hood lock.
- Using an ohmmeter, measure the resistance and check the results in accordance with the value(s) in TESTER CONNECTION SPECIFIED CONDITION TABLE
.
- Check the resistance of the engine hood courtesy switch.