Steering Pad: Removal

WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION: Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing (See AIRBAG SYSTEM ).

DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

Fig 1: Identifying Steering Pad And Steering Wheel
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE STEERING PAD
1. Using "Torx" socket wrench T30, loosen the 2 bolts completely.
2. Pull the steering pad toward you.
  
  Fig 2: Identifying Steering Pad And Steering Wheel
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Using a thin-bladed screwdriver, release the locking button.
4. Using a thin-bladed screwdriver, disconnect the 2 connectors.
5. Detach the horn terminal.