On-Vehicle Inspection

WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.

INSPECT SEAT POSITION SENSOR (for Vehicle not Involved in Collision)
1. Perform a diagnostic system check (See DTC CHECK / CLEAR ).
INSPECT SEAT POSITION SENSOR (for Vehicle Involved in Collision)
1. Perform a diagnostic system check (See DTC CHECK / CLEAR ).
2. Even if the airbag was not deployed, check whether there is any damage to the seat position sensor. If there are any defects such as those mentioned below, replace the seat position sensor with a new one:
  - Cracks, dents or chips on the sensor housing.
  - Cracks or other damage to the connector.
  CAUTION: Follow the correct removal and installation procedures.