LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> FJ Cruiser RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 194 (Supplemental Restraint System) >> Occupant Classification System >> DTC Check / Clear

DTC Check / Clear

WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK DTC 

    HINT:

    • When DTC B1650/23 is detected as a result of troubleshooting for the airbag system, troubleshoot the occupant classification system.
    • Use a Techstream to read and clear DTCs, otherwise the DTCs cannot be read and cleared.
    1. Connect the Techstream to the DLC3.
    2. Turn the ignition switch to ON.
    3. Turn the tester on.
    4. Enter the following menus: Body Electrical / Occupant Detection / Trouble Codes.
  2. CLEAR DTC 
    1. Connect the Techstream to the DLC3.
    2. Turn the ignition switch to ON.
    3. Turn the tester on.
    4. Enter the following menus: Body Electrical / Occupant Detection / Trouble Codes.
    5. Clear the DTCs.
scientia non olet · About LEMON Manuals