SIDE MUDGUARD (for Hatchback): Removal

WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.

HINT:

The procedure described below is for the LH side. Use the same procedure for both the RH and LH sides, unless otherwise specified.

REMOVE SIDE MUDGUARD
1. Remove the screw.
2. Using a clip remover, remove the 8 retainers.
  
  Fig 1: Locating Retainers
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Using an infrared light, heat the side mudguard protector.
4. Disengage the 8 clips and remove the double-sided adhesive tape of the side mudguard protector, and remove the side mudguard.