REAR BUMPER (for Hatchback): Disassembly

WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.

REMOVE REAR BUMPER ENERGY ABSORBER LH
1. Remove the clip.
2. Remove the 2 pieces of tape and the rear bumper energy absorber.
REMOVE REAR BUMPER ENERGY ABSORBER RH
HINT:

Use the same procedure as for the LH side.

Fig 1: Locating Rear Bumper Energy Absorber
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE LICENSE PLATE LIGHT ASSEMBLY
1. Disengage the 2 claws and remove the license plate light.
  
  Fig 2: Locating Claws And License Plate Light
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002