FRONT PILLAR UPPER COVER (for Hatchback): Removal

WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.

HINT:

The procedure described below is for the LH side. Use the same procedure for both the RH and LH sides, unless otherwise specified.

REMOVE FRONT PILLAR UPPER COVER
1. Apply protective tape to the body panel in the area around the front pillar upper cover.
  
  Fig 1: Applying Protective Tape To Body Panel
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Using a molding remover, disengage the 2 claws and the clip and remove the front pillar upper cover.