OUTER REAR VIEW MIRROR (for Sedan): Inspection

WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.

INSPECT OUTER REAR VIEW MIRROR ASSEMBLY LH

Check the operation.

Apply battery voltage to the outer rear view mirror and check the operation of the outer rear view mirror.

Standard

MEASUREMENT CONDITION

Measurement Condition	Mirror Assembly Operation
Battery positive (+) - Terminal 5 (MV) Battery negative (-) - Terminal 4 (COM)	Turns upward
Battery positive (+) - Terminal 4 (COM) Battery negative (-) - Terminal 5 (MV)	Turns downward
Battery positive (+) - Terminal 3 (MH) Battery negative (-) - Terminal 4 (COM)	Turns left
Battery positive (+) - Terminal 4 (COM) Battery negative (-) - Terminal 3 (MH)	Turns right

If the result is not as specified, replace the outer rear view mirror.

Fig 1: Identifying Outer Rear View Mirror Assembly RH

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

INSPECT OUTER REAR VIEW MIRROR ASSEMBLY RH

Check the operation.

Apply battery voltage to the outer rear view mirror and check the operation of the outer rear view mirror.

Standard

MEASUREMENT CONDITION

Measurement Condition	Mirror Assembly Operation
Battery positive (+) - Terminal 5 (MV) Battery negative (-) - Terminal 4 (COM)	Turns upward
Battery positive (+) - Terminal 4 (COM) Battery negative (-) - Terminal 5 (MV)	Turns downward
Battery positive (+) - Terminal 3 (MH) Battery negative (-) - Terminal 4 (COM)	Turns left
Battery positive (+) - Terminal 4 (COM) Battery negative (-) - Terminal 3 (MH)	Turns right

If the result is not as specified, replace the outer rear view mirror.

Fig 2: Identifying Outer Mirror Cover Claw