REAR CONSOLE BOX (for Sedan): Reassembly

WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL CONSOLE COMPARTMENT DOOR CUSHION
1. for Console compartment door:
  1. Install the console compartment door cushion.
    
    Fig 1: Identifying Console Compartment Door
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. for Console rear end panel:
  1. Install the console compartment door cushion.
    
    Fig 2: Identifying For Console Rear End Panel
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL CONSOLE COMPARTMENT DOOR LOCK SUB-ASSEMBLY
1. Install the console compartment door lock with the 2 screws.
  
  Fig 3: Identifying Console Compartment Door Lock Sub-Assembly Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL CONSOLE COMPARTMENT DOOR SUB-ASSEMBLY
1. Install the console compartment door lock with the 4 screws.
  
  Fig 4: Identifying Console Compartment Door Sub-Assembly Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL CONSOLE BOX CUP HOLDER
1. Engage the hinge portion of the cup holder and install the cup holder.
  
  Fig 5: Identifying Console Box Cup Holder
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL CONSOLE REAR END PANEL SUB-ASSEMBLY
1. Engage the 4 claws and 4 clips.
2. Install the console rear end panel with the 2 screws.
  
  Fig 6: Identifying Console Rear End Panel Sub-Assembly Claws And Clips
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002