REAR CONSOLE BOX (for Sedan): Disassembly

WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.

REMOVE CONSOLE REAR END PANEL SUB-ASSEMBLY
1. Remove the 2 screws.
2. Disengage the 4 claws and 4 clips and remove the console rear end panel.
  
  Fig 1: Identifying Console Rear End Panel Sub-Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE CONSOLE BOX CUP HOLDER
1. Using a screwdriver with its tip wrapped in protective tape, prize the hinge portion of the cup holder from side to side while being careful not to apply excessive load to the axis of the instrument panel upper, and remove the cup holder.
  
  Fig 2: Removing Console Box Cup Holder
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE CONSOLE COMPARTMENT DOOR SUB-ASSEMBLY
1. Remove the 4 screws and remove the console compartment door.
  
  Fig 3: Locating Console Compartment Door Sub-Assembly Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE CONSOLE COMPARTMENT DOOR LOCK SUB-ASSEMBLY
1. Remove the 2 screws and remove the console compartment door lock.
  
  Fig 4: Identifying Console Compartment Door Lock Sub-Assembly Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE CONSOLE COMPARTMENT DOOR CUSHION
1. for Console compartment door:
  1. Remove the console compartment door cushion.
    
    Fig 5: Identifying Console Compartment Door Cushion
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. for Console rear end panel:
  1. Remove the console compartment door cushion.
    
    Fig 6: Identifying Console Rear End Panel
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002