STOP LIGHT SWITCH (for Sedan): Inspection
WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.
- INSPECT STOP LIGHT SWITCH
- Check the resistance.
- Using an ohmmeter, measure the resistance and check the results in accordance with the value(s) in the table below.
Standard Resistance
TESTER CONNECTION SPECIFIED CONDITION CHARTTester Connection Condition Specified Condition 1-2 Switch pin released Below 1 Ω 3-4 10 kΩ or higher 1-2 Switch pin pushed in 10 kΩ or higher 3-4 Below 1 Ω
- Using an ohmmeter, measure the resistance and check the results in accordance with the value(s) in the table below.
- Check the resistance.