LICENSE PLATE LIGHT ASSEMBLY (for Hatchback): Installation

WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL LICENSE PLATE LIGHT ASSEMBLY
1. Install the license plate light bulb into the light socket.
2. Turn the license plate light bulb socket and bulb, in the direction indicated by the arrow in the illustration, to install them.
3. Connect the connector.
  
  Fig 1: Turning License Plate Light Bulb Socket And Bulb
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Engage the claw and install the license plate light.
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf)

Fig 2: Identifying License Plate Light Claw
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002