HIGH MOUNTED STOP LIGHT ASSEMBLY (for Sedan without Rear Spoiler): Installation

WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL HIGH MOUNTED STOP LIGHT BULB
1. Install the high mounted stop light bulb into the light socket.
2. Turn the high mounted stop light bulb socket and bulb, in the direction indicated by the arrow in the illustration, to install them.
  
  Fig 1: Turning High Mounted Stop Light Bulb Socket And Bulb
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL HIGH MOUNTED STOP LIGHT ASSEMBLY
1. Connect the connector.
2. Engage the 4 claws and install the high mounted stop light assembly.
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf)

Fig 2: Locating High Mounted Stop Light Assembly Claws
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002