HIGH MOUNTED STOP LIGHT ASSEMBLY (for Sedan with Rear Spoiler): Installation

WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL HIGH MOUNTED STOP LIGHT ASSEMBLY
1. Connect the connector.
2. Install the high mounted stop light with the 2 bolts.
  Torque: 1.3 N*m (13 kgf*cm, 11 in.*lbf)
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf)

Fig 1: Locating High Mounted Stop Light Bolts
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002