HEADLIGHT ASSEMBLY (for Sedan): Reassembly

WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL SIDE MARKER LIGHT BULB
1. Install the side marker light bulb into the light socket.
2. Turn the side marker light bulb socket and bulb, in the direction indicated by the arrow in the illustration, to install them.
  
  Fig 1: Turning Side Marker Light Bulb Socket And Bulb
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL FRONT TURN SIGNAL AND PARKING LIGHT BULB
1. Install the front turn signal and parking light bulb into the light socket.
2. Turn the front turn signal and parking light bulb socket and bulb, in the direction indicated by the arrow in the illustration, to install them.
  
  Fig 2: Turning Front Turn Signal And Parking Light Bulb Socket And Bulb
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL HEADLIGHT NO.1 BULB
1. Install the headlight No. 1 bulb.
  
  Fig 3: Identifying Headlight No. 1 Bulb
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Lock the set spring by moving it in the directions indicated by the arrow in the illustration.
  
  Fig 4: Locating Set Spring
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Install the socket cover.
  
  Fig 5: Locating Socket Cover
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002