HEADLIGHT ASSEMBLY (for Sedan): Disassembly

WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.

REMOVE HEADLIGHT NO.1 BULB
1. Remove the socket cover.
  
  Fig 1: Locating Socket Cover
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Push the set spring, and pull it in the directions indicated by the arrow in the illustration, to disengage it.
  
  Fig 2: Locating Set Spring
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Remove the headlight No. 1 bulb.
  NOTE: Do not touch the bulb glass with your fingers.
  
  Fig 3: Identifying Headlight No. 1 Bulb
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE FRONT TURN SIGNAL AND PARKING LIGHT BULB
1. Turn the front turn signal and parking light socket and bulb, in the direction indicated by the arrow in the illustration, to remove them.
2. Remove the front turn signal and parking light bulb from the light socket.
  
  Fig 4: Turning Front Turn Signal And Parking Light Socket And Bulb
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE SIDE MARKER LIGHT BULB
1. Turn the side marker light socket and bulb, in the direction indicated by the arrow in the illustration, to remove them.
2. Remove the side marker light bulb from the light socket.
  
  Fig 5: Turning Side Marker Light Socket And Bulb
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002