HEADLIGHT ASSEMBLY (for Hatchback): Disassembly

WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.

REMOVE HEADLIGHT BULB
1. Remove the socket cover.
  
  Fig 1: Locating Socket Cover
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Push the set spring, and pull it in the direction indicated by the arrows in the illustration, to disengage it.
  
  Fig 2: Locating Set Spring
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Remove the headlight bulb.
  NOTE: Do not touch the bulb glass with your fingers.
  
  Fig 3: Locating Headlight Bulb
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE CLEARANCE LIGHT BULB
1. Turn the clearance light bulb socket and bulb, in the direction indicated by the arrow in the illustration, to remove them.
2. Remove the clearance light bulb from the light socket.
  
  Fig 4: Turning Clearance Light Bulb Socket And Bulb
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE FRONT TURN SIGNAL LIGHT BULB
1. Turn the front turn signal light socket and bulb, in the direction indicated by the arrow in the illustration, to remove them.
2. Remove the front turn signal light bulb from the light socket.
  
  Fig 5: Turning Front Turn Signal Light Socket And Bulb
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE PARKING LIGHT BULB
1. Turn the parking light socket and bulb, in the direction indicated by the arrow in the illustration, to remove them.
2. Remove the parking light bulb from the light socket.