HAZARD WARNING SWITCH (for Hatchback): Removal

WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.

DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
REMOVE INSTRUMENT PANEL FINISH PANEL END LH (See REMOVAL )
REMOVE HAZARD WARNING SIGNAL SWITCH
1. Disengage the 2 claws and remove the hazard warning signal switch.
  
  Fig 1: Identifying Hazard Warning Signal Switch Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002