Customize Parameters

WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.

CUSTOMIZING FUNCTION WITH TECHSTREAM

HINT:

The following items can be customized.

NOTE:

When the customer requests a change in a function, first make sure that the function can be customized.
Record the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.

Connect a Techstream to the DLC3.
Turn the ignition switch ON.
Turn the tester on.
Enter the following menus: Body Electrical / Main Body / Utility / Customize / Wireless Door Lock.
Select the setting by referring to the table below.

Main Body:

WIRELESS DOOR LOCK CONTROL SYSTEM

Display (Item)	Default	Contents	Setting
Hazard Answer Back	ON	When wireless lock switch on transmitter pressed, illuminates all hazard warning lights once. When unlock switch pressed, all hazard warning lights illuminate twice	ON / OFF
Wireless Control	ON	ON / OFF of wireless door lock function	ON / OFF
Panic Function	ON	Operates security alarm when panic switch on transmitter continuously pressed for 1 second	ON/OFF
Unlock /2 Operation	ON	Function that unlocks driver side door when unlock switch on transmitter is pressed once, and unlocks all doors when pressed twice, if setting is OFF, pressing unlock switch once makes all doors unlock.	ON / OFF
Auto Lock Time	30 seconds	Time until relocking after unlocking with wireless door lock function	60 seconds / 30 seconds