Transmitter Battery: Installation

WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL TRANSMITTER BATTERY
1. Install the transmitter battery.
  1. Install a battery (lithium battery: CR2016) with the positive (+) side up, as shown in the illustration.
    NOTE:
    Make sure that the positive (+) side and the negative (-) side of the transmitter battery are correctly matched up with the transmitter terminals.
    
    Do not bend the transmitter battery electrode during insertion.
    
    Keep the transmitter cover interior free of dust and oil.
    
    Fig 1: Identifying Battery
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. Install the cover securely.
    
    Fig 2: Identifying Battery Cover
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. Install the door control transmitter module into the transmitter housing case.
    
    Fig 3: Identifying Door Control Transmitter Module
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. Install the transmitter housing cover onto the transmitter housing case securely.
  5. After installation, press any of the transmitter switches. Check that the LED illuminates.